Little House Kit - 4" tall x 4" wide

It is laser cut from Baltic birch plywood and measures 4" tall x 4" wide x 3" deep when assembled. Inside dimensions are 2 1/4" x 2 3/4". Note: this house does not have a base. It is shipped flat and requires assembly (only requires a bit of white glue). To assemble this house lay all pieces flat. Run a small bead of white glue along all of the wall tabs. Piece walls together and place an elastic band around the structure (to hold it together while it dries). Remove any excess glue. Run a small bead of white glue along the roof lines of the peaked walls and along the roof tabs. Piece the roof pieces together and sit them on top of the house. Leave to dry until set.